Jiangsu Changcheng Cable Co.,Ltd

0.6/1kv low voltage power cable:

Introduction:

Low voltage power cables, wire and cords (0.6/1kV) are used in most of electrical project like low voltage side of distribution transformer, buildings, low voltage network, control board of motors, control boards in Diesel generators, Telecommunication (DC and AC) power system and etc.. 

The selection of LV cables, wire and cords for any types of above mentioned projects has to be in proper or an engineering way, otherwise a set of risks will be come up and the cost will be impacted and some time some disaster may be happened.

So, below are two different types of work that LV power cables and wires are used as an example:

1. Distribution transformer Regarding the low voltage side of low Voltage Transformer, normally the single Core cable are used.

2. Wiring of building: Building, workshop, establishment building Have also needed the engineering plan and Design.

LV power cable structure :

There are two types of Low voltage (0.6/1kV) power cables that are being used in different fields which are:

1. Single core.

2.Multi-core.

Insulation: This part is responsible for insulating the metal core from the surrounded area, and there are different types of insulations: 1- PVC (Polyvinyl chloride) 2- XLPE (Cross Linked Polyethylene) 3- PE (Polyethylene) 

Bedding, separating sheath, type of armour and outer   sheath: These parts of cable are giving the cable the circular shape, providing the shielding layer of the cable for availability of mechanical protection of the cable, providing the protection of the voltage that are bigger than 1Kv and carrying the error current that may be happened during the error that may generated due to earthing system....

Metal Core:

Previously as it is mentioned the most popular metal that are used in the manufacturing of the LV (0.6/1kV) power cable, wire and cords are copper and aluminum, because these two metals own the high conductivity. 

Type of Insulation of LV power cables:

In LV (0.6/1Kv) power cables structure there is one layer which is called insulation layer, within this layer couple types of insulation can be used like (PVC, XELP and PE), in the structure of these insulation types, the polymer material are being used. 

Polymer material is divided in two types: 

Thermoplastic:PVC PE

Thermo sets: XLPE  Rubber

Our main products of 0.6/1kV low voltage power cable:

PVC insulated PVC sheathed power cable

PE insulated PVC sheathed power cable

XLPE insulated PVC sheathed power cable

Metal shielded power cable

Armoured power cable ect..

Factory information: 

Welcome to our factory !

http://www.cncablefactory.com/